Segítség a termékek kiválasztásában

FEAC-S-032A-P-0.0M
22070000039

Charging device outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with type 2 charging device plugs for installation in electric vehicle charging stations (EVSE)

összehasonlítás

Termékek típusa

Minden alkalommal csak 4 termék hasonlítható össze. Kérjük, válassza ki a cserélni kívánt termékeket.

    • Áttekintés
    • Műszaki adatok
    • Melléklet
    • Tanúsítvány
    • Üzleti adatok
    • Információk letöltése

    Termék tanúsítás

    A termék előnyei

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. 3D modell
    2. Environmental conditions
    3. Electrical characteristics
    4. Mechanical properties
    5. Installation
    6. Marking material
    7. Locking device
    8. Lock actuator
    9. Cable
    10. Bag
    11. Temperature Sensor
    12. Environmental Product Compliance
    13. Dimension

    3D modell

    Environmental conditions

    Maximum altitude5000m(Above sea level )
    Ambient temperature (operation)- 30 °C ~ 50 °C
    Ambient temperature (storage / transport)- 40 °C ~ 80 °C
    IP classIP54(protection cover)

    Electrical characteristics

    Maximum charge power8KW
    Phase1
    Power pin quantity3
    Rated current of high-power contacts32
    Power contact rated voltage250
    Quantity of signal contacts2
    Signal contact rated current2
    Signal contact rated voltage30
    Signal transmission typePulse width adjustment
    Connection method precautionsScrew connection
    Temperature measurementNTC

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force< 100N
    Pull out force< 100N

    Installation

    Available installation locationRear board installation
    Limit of the installation locationOnly allow 0 to 90 degrees frontal tilt
    Lock actuator installation locationTop center, can only be installed at the rear
    Mounting hole diameter6.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basisProvided according to customer requirements
    Contact surface materialAg
    Marking materialPlastic

    Locking device

    Lock typeSecured by locking device after insertion

    Lock actuator

    Poles of pluggable connectors3
    Motor possible supply voltage range9-15.5V
    Response time1s
    Service life10000 times load
    Ambient temperature (operation)_40 °C ... 80 °C
    Cable length0.4m

    Cable

    Cable composition2 x6 mm² + 1 x 10 mm² + 2× 0.75 mm²
    3*6mm²+2*0.75mm²

    Bag

    colorBlue

    Temperature Sensor

    Sensor typeNTC
    Temperature range_30 °C ... 200 °C

    Environmental Product Compliance

    REACHconform
    China RoHSconform

    Dimension

    Depth101mm
    Hole diameter58 mm x 61 mm
    Wire length0m
    0.4 m (Lock the actuator cable )
    width99mm
    Height127.3mm

    TUV parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 250V
    Rated current 32A
    IP class IP54
    Rendelésszám 22070000039
    Csomagolási egység 5pcs/box
    Minimális rendelési mennyiség 5
    A termékek súlya (csomagolás nélkül) 13.65
    3D
    FEAC-S-032A-P-03-0.0M-11AH.stp Információk letöltése
    CAD Data
    FEAC-S-032A-P-03-0.0M-11AH.dxf Információk letöltése
    Data
    FEAC-S-032A-P-03-0.0M-11A(H).pdf Információk letöltése
    Online konzultáció